![]() Step 2: Position the drill bit at the center of the keyhole and drill slowly, applying firm but gentle pressure. Choose an appropriately sized drill bit for the lock cylinder and attach it to your drill. Step 1: Put on safety goggles to protect your eyes. This method should only be attempted if you’re comfortable using power tools and have no other options. If all else fails and you’re unable to remove the deadbolt lock using the above methods, drilling out the lock cylinder may be your last resort. With all components detached, you can pull the interconnected deadbolt lock out of the door. Step 4: Finally, remove any remaining screws holding the deadbolt lock in place. Once the screws are removed, take out the cylinder from the outer side of the door. Step 3: Similar to the previous methods, access and remove the screws securing the lock cylinder in place. Step 2: Locate and unscrew the screws holding the thumbturn in place. These screws are typically found on the edge of the door. Step 1: Start by removing the mounting screws securing the plate against the door. If you’re dealing with an interconnected deadbolt lock (connected to a handle or lever on the same plate), follow these steps: Step 4: Once all components are removed, you can pull the deadbolt lock out of the door completely. Unscrew these and remove the plate and thumbturn. ![]() Step 3: As with the single-cylinder deadbolt lock, access the screws securing the lock plate and thumbturn. Once the screws are removed, you should be able to pull out the cylinder from the outer side of the door. Step 2: Using a screwdriver, release the screws holding the lock cylinder in place. These screws are usually found on the edge of the door. Step 1: Locate and remove the screws holding the interior plate against the door. If you’re dealing with a double-cylinder deadbolt lock (requires a key to lock or unlock from both sides), the process is slightly different: Once removed, the deadbolt lock should come apart, allowing you to remove it from the door. Step 4: Finally, take a screwdriver and unscrew the screws holding the thumbturn in place. ![]() Step 3: With the cylinder removed, you should be able to access the screws securing the lock plate to the door. Be careful not to damage any surrounding parts. Step 2: Once the cylinder is released, you can pull it out of the lock body using pliers. Insert a flathead screwdriver into this slot and turn it counterclockwise to release the cylinder. Look for a small slot on the edge of the cylinder face. If you have a single-cylinder deadbolt lock, follow these steps: Identifying the type of lock you have will help determine the appropriate removal method. Drill (optional): If all else fails, you may need to resort to drilling out the lock cylinder.ĭeadbolt locks come in various types, including single-cylinder, double-cylinder, and interconnected deadbolts.Pliers: Pliers will come in handy for gripping and turning certain components.Hammer: A hammer will be useful if any part of the lock needs to be tapped or knocked out.Screwdriver: Depending on the type of deadbolt lock, you may need either a flathead or Phillips screwdriver.Removing an Interconnected Deadbolt Lockīefore you begin, ensure you have the following tools readily available:. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |